Specific LCD P-settings

Most e-scooters are outfitted with the industry standard LCD display and throttle, that have pre-programmed settings (P-settings) .These throttles are designed to be easy to use and provide a range of ride customisation adjustments to fit most of needs, but it allow you to adjust features like cruise control, zero-start, and speedometer units (mph/kph). 

Learn how to access P-settings for LCD finger throttles, which you can adjust, and which presets you should not mess with.

LCD Throttle

The two main types of LCD trigger throttles are the EYE throttle, QS-S4 and LT-01 throttle. To access P-settings, you use the available buttons on the dashboard to get to the menu, toggle through features, and adjust values up and down.

Electric scooters most often include 10 to 15 P-settings, including some presets which should not be adjusted. Presets that should not be adjusted are battery voltage, battery voltage protection, motor magnets, and automatic scooter voltage shut-down. These presets affect how the motor and battery are calibrated and should not be adjusted unless you understand the functions.

Common P-settings

P-settings allow scooter riders to customize their ride. The top 5 programmed features in both types of LCD finger throttles are:

  1. Cruise control
  2. Speedometer units
  3. Start mode (kick-to-start or zero-start)
  4. Power level
  5. Acceleration

Other common P-settings for electric scooters include electronic brake strength, LCD brightness, auto-off time, and wheel diameter. 

Manufacturers often skip using some P-setting positions, so there may be 20 positions available but only 14 have programmed settings. Ordinarily, instructions for how to access P-settings and adjust designated features are included in the scooter instruction manual. 

NOTE: Many LCD throttles include a USB port on the back of the display that provides low-voltage charging. Some sellers and scooter riders have reported malfunctioning LCDs and/or throttles after plugging in a mobile phone. These USB ports are typically very limited in the amount of current they can output, and we don’t recommend using them for charging external devices, as they are mostly intended for flashing the LCD. 

Specific LCD P-settings

ZERO 8 p-settings

P 01

LCD BRIGHTNESS

1: low 2: mid 3: high

P 02

MILAGE

1: mph 2: kph

P 03

VOLTAGE

Default: 48 (Do Not Adjust)

P 04

AUTO SHUT OFF

0: not set 60: 60 min

P 05

UNUSED

P 06

WHEEL DIAMETER

Default: 8 (Do Not Adjust)

P 07

MAGNETS

Default: 28 (Do Not Adjust)

P 08

POWER LIMIT

1: slowest 100: fastest 

P 09

KICKSTART

0: zero start 1: kick to start

P 10

UNUSED

P 11

ELECTRONIC BREAKING 

Braking level: 1-5 Recommended 3 or 4.

P 12

ACCELERATION

1: soft start 5: high torque start. Set as desired.

P 13

UNUSED

P 14

UNUSED

P 15

CUTOFF VOLTAGE

Automatic scooter voltage shut-down (Do Not Adjust)

P 16

ODOMETER RESET

P 17

CRUISE CONTROL

0: off  1: on*

P 18

UNUSED

P 19

UNUSED

P 20

UNUSED

*Cruise control: set to 0 for beginners. Set to 1 for advanced riders. Cruise control will start automatically when speed is maintained. Cruise will turn off when the break or throttle is activated. Cruise control can be dangerous if you are not an experienced rider.

ZERO 8PRO p-settings

P 01

LCD BRIGHTNESS

1: low 2: mid 3: high

P 02

MILAGE

1: mph 2: kph

P 03

VOLTAGE

Default: 48 (Do Not Adjust)

P 04

AUTO SHUT OFF

0: not set 60: 60 min

P 05

UNUSED

P 06

WHEEL DIAMETER

Default: 8 (Do Not Adjust)

P 07

MAGNETS

Default: 28 (Do Not Adjust)

P 08

POWER LIMIT

1: slowest 100: fastest 

P 09

KICKSTART

0: zero start 1: kick to start

P 10

UNUSED

P 11

ELECTRONIC BREAKING 

Braking level: 1-5 Recommended 3 or 4.

P 12

ACCELERATION

1: soft start 5: high torque start. Set as desired.

P 13

UNUSED

P 14

UNUSED

P 15

CUTOFF VOLTAGE

Automatic scooter voltage shut-down (Do Not Adjust)

P 16

ODOMETER RESET

P 17

CRUISE CONTROL

0: off  1: on*

P 18

UNUSED

P 19

UNUSED

P 20

UNUSED

* Cruise control: set to 0 for beginners. Set to 1 for advanced riders. Cruise control will start automatically when speed is maintained. Cruise will turn off when the break or throttle is activated. Cruise control can be dangerous if you are not an experienced rider.

ZERO 8X p-settings

P 01

LCD BRIGHTNESS

1: low 2: mid 3: high

P 02

MILAGE

1: mph 2: kph

P 03

VOLTAGE

Default: 48 (Do Not Adjust)

P 04

AUTO SHUT OFF

0: not set 60: 60 min

P 05

UNUSED

P 06

WHEEL DIAMETER

Default: 8 (Do Not Adjust)

P 07

MAGNETS

Default: 28 (Do Not Adjust)

P 08

POWER LIMIT

1: slowest 100: fastest 

P 09

KICKSTART

0: zero start 1: kick to start

P 10

UNUSED

P 11

ELECTRONIC BREAKING 

Braking level: 1-5 Recommended 3 or 4.

P 12

ACCELERATION

1: soft start 5: high torque start. Set as desired.

P 13

UNUSED

P 14

UNUSED

P 15

CUTOFF VOLTAGE

Automatic scooter voltage shut-down (Do Not Adjust)

P 16

ODOMETER RESET

P 17

CRUISE CONTROL

0: off  1: on*

P 18

UNUSED

P 19

UNUSED

P 20

UNUSED

* Cruise control: set to 0 for beginners. Set to 1 for advanced riders. Cruise control will start automatically when speed is maintained. Cruise will turn off when the break or throttle is activated. Cruise control can be dangerous if you are not an experienced rider.

ZERO 9 p-settings

P 01

LCD BRIGHTNESS

1: low 2: mid 3: high

P 02

MILAGE

1: mph 2: kph

P 03

VOLTAGE

Default: 48 (Do Not Adjust)

P 04

AUTO SHUT OFF

0: not set 60: 60 min

P 05

UNUSED

P 06

WHEEL DIAMETER

Default: 8 (Do Not Adjust)

P 07

MAGNETS

Default: 28 (Do Not Adjust)

P 08

POWER LIMIT

1: slowest 100: fastest 

P 09

KICKSTART

0: zero start 1: kick to start

P 10

UNUSED

P 11

ELECTRONIC BREAKING 

Braking level: 1-5 Recommended 3 or 4.

P 12

ACCELERATION

1: soft start 5: high torque start. Set as desired.

P 13

UNUSED

P 14

UNUSED

P 15

CUTOFF VOLTAGE

Automatic scooter voltage shut-down (Do Not Adjust)

P 16

ODOMETER RESET

P 17

CRUISE CONTROL

0: off  1: on*

P 18

UNUSED

P 19

UNUSED

P 20

UNUSED

* Cruise control: set to 0 for beginners. Set to 1 for advanced riders. Cruise control will start automatically when speed is maintained. Cruise will turn off when the break or throttle is activated. Cruise control can be dangerous if you are not an experienced rider.

ZERO 10x 52v p-settings

P 01

LCD BRIGHTNESS

1: low 2: mid 3: high

P 02

MILAGE

1: mph 2: kph

P 03

VOLTAGE

Default: 52 (Do Not Adjust)

P 04

AUTO SHUT OFF

0: not set 60: 60 min

P 05

UNUSED

P 06

WHEEL DIAMETER

Default: 10 (Do Not Adjust)

P 07

MAGNETS

Default: 28 (Do Not Adjust)

P 08

POWER LIMIT

1: slowest 100: fastest 

P 09

KICKSTART

0: zero start 1: kick to start

P 10

UNUSED

P 11

ELECTRONIC BREAKING 

Braking level: 1-5 Recommended 3 or 4.

P 12

ACCELERATION

1: soft start 5: high torque start. Set as desired.

P 13

UNUSED

P 14

UNUSED

P 15

CUTOFF VOLTAGE

Default: 42 (Do Not Adjust)

P 16

ODOMETER RESET

P 17

CRUISE CONTROL

0: off  1: on*

P 18

UNUSED

P 19

UNUSED

P 20

UNUSED

* Cruise control: set to 0 for beginners. Set to 1 for advanced riders. Cruise control will start automatically when speed is maintained. Cruise will turn off when the break or throttle is activated. Cruise control can be dangerous if you are not an experienced rider.

ZERO 10x 60v p-settings

P 01

LCD BRIGHTNESS

1: low 2: mid 3: high

P 02

MILAGE

1: mph 2: kph

P 03

VOLTAGE

Default: 60 (Do Not Adjust)

P 04

AUTO SHUT OFF

0: not set 60: 60 min

P 05

UNUSED

P 06

WHEEL DIAMETER

Default: 10 (Do Not Adjust)

P 07

MAGNETS

Default: 28 (Do Not Adjust)

P 08

POWER LIMIT

1: slowest 100: fastest 

P 09

KICKSTART

0: zero start 1: kick to start

P 10

UNUSED

P 11

ELECTRONIC BREAKING 

Braking level: 1-5 Recommended 3 or 4.

P 12

ACCELERATION

1: soft start 5: high torque start. Set as desired.

P 13

UNUSED

P 14

UNUSED

P 15

CUTOFF VOLTAGE

Default: 49 (Do Not Adjust)

P 16

ODOMETER RESET

P 17

CRUISE CONTROL

0: off  1: on*

P 18

UNUSED

P 19

UNUSED

P 20

UNUSED

* Cruise control: set to 0 for beginners. Set to 1 for advanced riders. Cruise control will start automatically when speed is maintained. Cruise will turn off when the break or throttle is activated. Cruise control can be dangerous if you are not an experienced rider.

We hope it has been helpful for you! 

Please feel free to leave a comment below or send us an e-mail at info@liferacer.ch

Have a nice ride!

– Your LIFE RACER Team. –

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest

More
articles

QS-S4 LCD Throttle Guide

This QS-S4 throttle guide explains the most complete manuals and covers everything from technical details to settings to troubleshooting, error codes and diagnostic steps.

Read More »

Kaabo Fresh Design 2021

All Kaabo Mantis bought by LIFE RACER are updated 2021 models! Find out more! Follow us on instagram, Facebook and stayed tuned along with all latest upgrades and news here on our site and through our social platforms.

Read More »

BACK TO NEWS & UPDATES

Stay updated with LIFE RACER
We will be happy to hear your thoughts

Leave a reply

LIFE RACER
Register New Account
Reset Password

LATEST

NEWS & UPDATES

QS-S4 LCD Throttle Guide

This QS-S4 throttle guide explains the most complete manuals and covers everything from technical details to settings to troubleshooting, error codes and diagnostic steps.

Read More »

Kaabo Fresh Design 2021

All Kaabo Mantis bought by LIFE RACER are updated 2021 models! Find out more! Follow us on instagram, Facebook and stayed tuned along with all latest upgrades and news here on our site and through our social platforms.

Read More »

FINANCING

INSTALMENT PAYMENTS You might want to get your new electric vehicle through instalments. In cooperation with a financial partner Crowd4Cash, we are happy to make

Read More »
Open chat