Xiaomi tuning for all software versions, Mi 3 S1 S2 Pro. Tuning to unlock the speed to 35 km/h (no longer limited to 20 km/h)
Important: Important: The actual speed is between 31 km/h and 36 km/h.
This tuning chip removes the speed limit of the e-scooter so that it travels between 31 km/h and 36 km/h. Installation is very easy and only takes 5 minutes. The chip only works with the Xiaomi 1S, Xiaomi Pro 2 and Mi 3 scooters.
More details:
- Easy installation: The enclosed instructions explain the installation step by step. Installation is very easy and can be completed in 5 minutes. You can’t do anything wrong or damage anything.
- Easy to use: After easy installation, the speed limit can be canceled before each trip by pressing the button on the speedometer 6 times. After switching off, the scooter behaves normally again until the tuning is activated again.
- Simply inconspicuous: The tuning does not make any permanent changes to the scooter. You can remove the tuning chip just as quickly and easily as you can install it. After removal, everything on the scooter is in its original condition and the tuning leaves no trace. The chip is not visible from the outside.
Not suitable for public transport.
In the event of an accident, insurance coverage could be affected.
We assume no responsibility whatsoever. Only ride with a helmet and all important protectors. With modification it can only be used as sports equipment. No liability for defects in the sports equipment and no liability for consequential damages from defects in the sports equipment.
Use at your own risk. Driving at high speeds is dangerous and increases the risk of injury.
The statutory conditions apply to liability for material defects and guarantees.
The 33 kmh is more of a theoretically safe maximum value. The circuit board sends the scooter the command to drive 33kmh. The scooter then uses 350W power if possible until 33 kmh is reached. However, the 350W is often not enough to achieve much more than 28 kmh.
Depending on the manufacturing tolerance of the motor and luck, you can achieve more or less speed with the 350W, but in any case at least 28 km/h.
The scooter uses the circuit board to achieve the maximum that the hardware allows.
